Junko, the 30€ PC

This is Junko, my first project after a couple of years, built it 4 or 5 weeks ago.
The only parts I bought was the RAM (20€), everything else was in my storage or got it from the Junk.
It was a Gigabyte GA-EP45-DS5 LGA 775 Mobo with a Intel Core 2 Duo E8400 @ 3.0 GHz, the Stock Cooler and 4 GB of Corsair Value 6400 DDR -2 RAM. It had a ECS Elitegroup Geforce 9500GT with 512 MD RAM, 2 WD Raptor 74 GB HDDs with 10000 RPM on an extra RAID Controller and a LG BluRay-RW and a beQuiet 650W PSU. The orignal Case was an Enermax (Type unknown, some low-budget one).

After cleaning every single screw (wearing cloves, owner was a heavy smoker), I put it back into it's original condition, but changed the RAM to 4 GB of Corsair Dominator DDR-2 8500 (20€on Ebay) and mounted it in a Thermaltake Tsunami Dream Case I found in the garbage some month ago.

Then a good friend told me about the Xeon LGA 771 to 775 modification.
So that was my goal, getting more power for less than 10 Bucks.
But before this, I had to check the complete Hardware for stability.
But...
The mobo failed during a test with OCCT, caused by some fried VRAM.
After setting the Vcore higher, it ran flawless, but without a future as the VRAM won't last for long.
So I decided to take it to pieces again and that's the point where project WILDCAT was born...

I remember those cases, always wanted one! I don't remember them having castor wheels however? a mod by yourself or a previous owner? - I think ill need to add a few HwH stickers into your envelope for all these builds

ehm, that was MY mod.
the bottom of the case is bend in all directions and didn't stand safe.
I just found the coasters in a box and mounted them.
there is just one problem...

the empty case falls over as the front door is really heavy, so there must be something on it.

hey makes moving it easier!

is there any room to move the front ones further forward and that should stop it falling over

nope.
but I'm just gonna put some stuff in it to prevent it from falling over.